Rendezvous AWD V6-3.4L VIN E (2005)
11. Install the crankshaft position sensor wiring bracket.
12. Install the crankshaft position sensor wiring bracket bolt.
^
Tighten the crankshaft position sensor wiring bracket bolt to 27 Nm (20 ft. lbs.).
13. Install the coolant pump pulley.
14. Connect the radiator outlet hose to the coolant pump.
15. Connect the thermostat bypass pipe to the engine front cover.
16. Install the power steering pump with lines.
17. Install the drive belt tensioner.
18. Install the crankshaft balancer.
19. Fill the engine with new engine oil.
20. Fill the cooling system with engine coolant. Refer to Draining and Filling Cooling System.
