Rendezvous AWD V6-3.4L VIN E (2005)
Headlamp Bulb: Service and Repair
HEADLAMP ASSEMBLY OR HEADLAMP BULB REPLACEMENT
REMOVAL PROCEDURE
1. Open the hood.
CAUTION: Refer to Halogen Bulb Caution in Service Precautions.
2. Remove the thumb screw from the back of the headlamp.
3. Release the headlamp retainer by lifting up.
4. Pull the headlamp straight forward, to release the ball stud from the grommet.
5. Remove the headlamp from the upper fascia support.
6. Disconnect the electrical connector from the headlamp.
7. Remove the bulb(s) from the headlamp by rotating counterclockwise.
8. Release the headlamp trim tabs from the headlamp, if required.