Rendezvous AWD V6-3.4L VIN E (2005)
Body Control Module: Scan Tool Testing and Procedures
Scan Tool Data Definitions
SCAN TOOL DATA DEFINITIONS
8 Digit GM Part Number: The scan tool displays the 8 digit BCM part number for service identification.
Electronics Battery Fd: The scan tool displays 0.0-25.5 volts. Electronics Battery Fd represents the system voltage measured by the BCM at its battery
feed input.
Ignition 0 (Data): The scan tool displays 0.0-25.5 volts. The Ignition 0 voltage represents the system voltage measured at the BCM Ignition 0 feed
input.
Ignition 0 (Inputs): The scan tool displays Active/Inactive. The scan tool displays Active when the ignition switch is in ACCY or RUN positions.
Ignition 1: The scan tool displays Active/Inactive. The scan tool displays Active when the ignition switch is in RUN or START positions.
Ignition Accessory: The scan tool displays Active/Inactive. The scan tool displays Active when the ignition switch is in ACCY or RUN positions.
Key In Ignition: The scan tool displays Active/Inactive. The scan tool displays Active when the ignition key is inserted into the ignition switch.
Park/Neutral Switch: The scan tool displays Active/Inactive. The scan tool displays Active when the shift lever is in the Park or Neutral positions.
RAP Relay: The scan tool displays On/Off. The Output of the RAP Relay is displayed as On.
Scan Tool Data List
Scan Tool Output Controls
