Rendezvous AWD V6-3.4L VIN E (2005)
3. Connect the EVAP pipe quick-connect fitting near the in-pipe fuel filter.
4. Connect the fuel return pipe quick-connect fitting near in-pipe fuel filter.
5. Connect the fuel feed pipe quick-connect fitting at the outlet of the in-pipe fuel filter (2).
6. Lower the vehicle.
7. Connect the fuel feed and fuel return pipe quick-connect fittings in the engine compartment.
8. Inspect the fuel pipe clips and fasteners for proper installation.
9. Lower the vehicle.
10. Tighten the fuel fill cap.
11. Reconnect the negative battery cable.
12. Inspect for fuel leaks with the following procedure:
1. Turn ON the ignition for 2 seconds.
2. Turn OFF the ignition for 10 seconds.
3. Turn ON the ignition.
4. Inspect for fuel leaks.
