Rendezvous AWD V6-3.4L VIN E (2005)
Positive: Service and Repair
BATTERY POSITIVE CABLE REPLACEMENT
REMOVAL PROCEDURE
When replacing battery cables, be sure to use replacement cables that are the same type, gauge and length.
1. Remove the battery ground (negative) cable from the battery.
2. Remove the battery positive cable from the battery.
3. Remove the battery positive cable nut and cable from the underhood electrical center.
4. Remove the battery positive cable nut and cable from the generator.
5. Raise and support the vehicle. Refer to Vehicle Lifting.
6. Remove the lower radiator baffle.
7. Remove the battery cable conduit from the conduit retainers.
8. Remove the starter motor BAT terminal nut from the starter motor.
