Rendezvous AWD V6-3.4L VIN E (2005)
9. Remove the battery positive cable from the starter motor BAT terminal.
10. Lower the vehicle.
11. Remove the battery positive cable from the vehicle.
INSTALLATION PROCEDURE
1. Install the battery positive cable to the vehicle.
2. Raise the vehicle. Refer to Vehicle Lifting.
3. Install the battery positive cable and nut to the starter motor BAT terminal.
Tighten the nut to 10 N.m (89 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the battery positive cable to the conduit.
5. Install the battery cable conduit to the conduit retainers.
6. Install the lower radiator baffle.
7. Lower the vehicle.
8. Connect the battery positive cable to the generator.
9. Install the battery positive cable and nut to the underhood electrical center.
Tighten the nut to 10 N.m (89 lb in).
