Rendezvous AWD V6-3.4L VIN E (2005)
11. Use the floor jack to raise the right side of the frame and powertrain.
12. Install the right rear frame-to-body bolt.
Tighten the right rear frame-to-body bolt to 240 Nm (177 ft. lbs.).
13. Install the right front frame-to-body bolt.
Tighten the right rear frame-to-body bolt to 155 Nm (114 ft. lbs.).
14. Remove the floor jack from the frame and the powertrain.
15. Raise and support the vehicle. Refer to Vehicle Lifting.
16. Install the inner fender liner.
17. Install the right front tire and wheel.
18. Lower the vehicle.
19. Fill the power steering reservoir with power steering fluid.
20. Bleed the power steering system.
21. Inspect the system for leaks.