Rendezvous AWD V6-3.4L VIN E (2005)
Power Steering Pump: Service and Repair
Power Steering Pulley Replacement
Power Steering Pulley Replacement (LA1)
Tools Required
^
J25034-C Power Steering Pump Pulley Remover
^
J25033-C Power Steering Pump Pulley Installer
Removal Procedure
1. Remove the power steering pump from the engine for clearance.
2. Use the J25034-C in order to remove the pump pulley.
Installation Procedure
Important:
^
Ensure that the face of the pulley hub is flush with the end of the pump shaft.
^
Do not use the arbor press to install the pulley.
1. Use the J25033-C in order to install the power steering pump pulley.
2. Install the power steering pump to the engine.
