Rendezvous AWD V6-3.4L VIN E (2005)
Steering Mounted Controls Transmitter: Service and Repair
Steering Wheel Control Switch Assembly Replacement
Removal Procedure
1. Caution:
Refer to Restraint System Service Precaution.
Disable the SIR System.
2. Remove the steering wheel.
3. Remove the retaining screws (2, 3) from the steering wheel rear bezel.
4. Remove the steering wheel rear bezel (1).
5. Disconnect the electrical connector.
6. Insert a small, blunt-ended tool into the access hole in the back of the steering wheel. Push the switch out of the steering wheel.
Installation procedure
1. Connect the electrical connector.
2. Align the switch to the opening in the steering wheel.
3. Push the switch into the steering wheel.
4. Install the steering wheel rear bezel (1).
5. Notice:
