Rendezvous AWD V6-3.4L VIN E (2005)
1. Important: The lower control arm vertical bushing MUST be installed in the same position which it was removed in order to maintain the
original vehicle ride, handling and road feel.
Align the flat edge of the bushing flange to the mark in the control arm (1).
2. Insert the bushing into the control arm.
3. Important: Apply J23444-A (or equivalent high pressure lubricant) to the threads of the J21474-27.
Assemble the bushing tools as shown.
4. Tighten the J21474-4 until the bushing is fully seated in the control arm.
5. Disassemble the bushing tools.
6. Install the lower control arm.
