Rendezvous AWD V6-3.4L VIN E (2005)
2. Install the lower control arm and mounting bolts (1, 5) to the crossmember.
3. Line up the mark on the lower control arm at the cam indicator (1).
4. Install the coil spring 2.
5. Install the tire and wheel assemblies.
6. Inspect the rear camber and toe angles and adjust as necessary.
7. Lower the vehicle. Refer to Vehicle Lifting.
Control Arm Bushing Replacement (Front Wheel Drive)
Control Arm Bushing Replacement (Front Wheel Drive)
Tools Required
^
J28685 Rear Suspension Bushing Remover/Installer
^
J9519-E Ball Joint Remover/Installer Kit