Rendezvous AWD V6-3.4L VIN E (2005)
10. Remove the rear crossmember mounting bolts (1).
11. With the help from an assistant , lower and rotate back the rear crossmember (1), approximately 114 mm (4 1/2 inch) at the front mount, to install
bushing removal/installation tool.
12. Remove the rear crossmember frame mounts using J45677 or equivalent.
Installation Procedure
1. Important: Identify the orientation of the voids in the mounts and install the mounts with the voids fore and aft to the vehicle.
Install the new frame mounts using J45677 or equivalent.
2. With the help from an assistant, guide the rear crossmember (1) into place while the assistant raises the hoist.
3. Notice: Refer to Fastener Notice in Service Precautions.
