Rendezvous AWD V6-3.4L VIN E (2005)
Band Apply Servo: Service and Repair
Forward Servo Replacement
Forward Servo Replacement (M76 (AWD)
Removal Procedure
1. Remove the transfer case.
2. Remove the forward band servo cover bolts.
3. Remove the forward servo cover.
4. Remove the forward servo cover O-ring.
5. Remove the servo piston assembly.
6. Remove the servo spring.
Installation Procedure
1. Install the servo spring.
2. Install the servo piston assembly.
3. Install the forward servo cover O-ring.
4. Install the forward servo cover.
5. Notice:
Refer to Fastener Notice in Service Precautions.
Install the forward band servo cover bolts.
Tighten the forward band servo cover bolts to 12 Nm (106 inch lbs.).
6. Install the transfer case.
