Rendezvous AWD V6-3.4L VIN E (2005)
^
Misalignment
21. Clean the oil pan, the gasket and the magnet in order to remove any sediment.
22. Notice:
Ensure the oil pan and the case flanges are dry and are free of any oil film or leakage may result.
Use solvent to clean the case.
23. Air dry the case.
24. Use solvent to clean the oil pan gasket surfaces.
25. Air dry the oil pan gasket surfaces.
26. Ensure all traces of the old gasket material are removed.
Installation Procedure
1. Install the oil pan gasket (25).
2. Install the oil pan (24).
3. Notice:
Refer to Fastener Notice in Service Precautions.
Install the oil pan bolts (23).
Tighten the oil pan bolts (23) to 14 Nm (10 ft. lbs.).
4. Lower the vehicle.
5. Fill the transaxle with the proper quantity of DEXRON® III.
6. Place the gear selector in the Park position.
7. Start the engine.
8. Run the engine at a slow idle. Do NOT race the engine.
9. Notice:
Do NOT overfill the transaxle. The overfilling of the transaxle causes foaming, loss of fluid, shift complaints, and possible damage to the
transaxle.
Adjust the fluid level. Refer to Transmission Fluid Checking Procedure, Capacities - Approximate Fluid and Fluid and Lubricant
Recommendations.
10. Inspect for proper completion of the repairs.
11. Inspect the fluid for leaks.
