Rendezvous AWD V6-3.4L VIN E (2005)
Flex Plate: Service and Repair
Engine Flywheel Replacement
Removal Procedure
1. Remove the automatic transaxle.
2. Remove the engine flywheel bolts and flywheel.
3. Clean the engine flywheel bolt threads and bolt holes.
4. Clean and inspect the engine flywheel. Refer to Engine Flywheel Cleaning and Inspection.
Installation Procedure
1. Notice: Refer to Fastener Notice in Service Precautions.
Install the engine flywheel and bolts
^
Tighten bolts to 71 Nm (52 ft. lbs.).
2. Install the automatic transaxle.