Rendezvous AWD V6-3.5L VIN L (2006)
1. Install a NEW water pump gasket onto the water pump.
2. Install the water pump.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the water pump bolts.
Tighten the bolts to 10 Nm (89 inch lbs.).
4. Install the water pump pulley.
5. Install the water pump pulley bolts until snug.
6. Install the drive belt.
7. Tighten the water pump pulley bolts.
Tighten the bolts to 25 Nm (18 ft. lbs.).
8. Fill the cooling system.
