Rendezvous AWD V6-3.6L VIN 7 (2004)
2. Install the fascia outer support.
3. Install the grille to the fascia. Refer to Fascia Grille Replacement (Aztek) (See: Grille/Service and Repair/Fascia Grille Replacement (Aztek)
)Fascia Grille Replacement (Rendezvous) (See: Grille/Service and Repair/Fascia Grille Replacement (Rendezvous)) .
4. Position the fascia to the vehicle.
5. Align the alignment pins of the fascia to the front fenders and moldings.
6. Engage the ball socket to the ball on the front fender
7. Install the push-in the retainers starting at the center, to the front upper bumper fascia support.
Notice: Refer to Fastener Notice in Cautions and Notices.
8. Install the bolts to the front fascia at the front fenders.
Tighten the front fascia bolts to 10 N.m (89 lb in).
Important: Push the retainer tabs up and against the front bumper energy absorber.
9. Install the push-in retainers to the fascia at the energy absorber.
10. Install the fog lamps. Refer to Fog Lamp Replacement - Front (Aztek) Fog Lamp Replacement - Front (Rendezvous) in Lighting Systems.
11. Install the headlamps. Refer to Headlamp Assembly or Headlamp Bulb Replacement (Aztek) Headlamp Assembly or Headlamp Bulb
Replacement (Rendezvous) in Lighting Systems.
12. Install the front fender liners. Refer to Front Fender Liner Replacement (See: Fender/Front Fender/Front Fender Liner/Service and Repair) in
Body Front End.
