Rendezvous AWD V6-3.6L VIN 7 (2004)
Front Door Weatherstrip: Service and Repair
Weatherstrip Replacement - Auxiliary
Weatherstrip Replacement - Auxiliary
Tools Required
J 38778 Door Trim Pad and Garnish Clip Remover
Removal Procedure
1. Open the rear door.
2. Remove the rear pillar auxiliary weatherstrip using J 38778 .
3. Open the front and rear doors.
4. Remove the center pillar auxiliary weatherstrip using J 38778 .
5. Remove the roofrail auxiliary weatherstrip push-in retainers from the rear pillar using J 38778 .
6. Remove the roofrail auxiliary weatherstrip from the roof rail flange pulling from the rear to front.
Bending back the roofrail auxiliary weatherstrip onto itself to open the carrier while pulling forward will ease the removal effort.
Installation Procedure