Rendezvous AWD V6-3.6L VIN 7 (2004)
1. Position the fender liner to the fender, over the studs and behind the rocker molding.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the nut to the stud at the rear of the front fender liner.
Tighten the front fender liner rear nut to 10 N.m (89 lb in).
3. Install the nut to the stud at the front of the front fender liner.
Tighten the front fender liner front nut to 10 N.m (89 lb in).
4. Install the screws to the front fender liner at the front bumper fascia and fender.
Tighten the front bumper fascia and fender screws to 2 N.m (18 lb in).
