Rendezvous AWD V6-3.6L VIN 7 (2004)
and Repair/Frame Cushion or Insulator Replacement - Front) .
2. Use a utility stand with the frame around it to support the powertrain.
3. Remove the transmission stand from the powertrain.
4. Install the frame to the vehicle.
5. Use the utility stand to raise the frame and powertrain.
Important: Ensure that the alignment pins remain installed during the frame installation.
6. Insert two 19 mm (0.75 in) diameter X 203 mm (8 in) long guide pins or drill bits into the frame right side alignment holes in order to align the
frame.
Notice: Refer to Fastener Notice in Cautions and Notices.
