Rendezvous AWD V6-3.6L VIN 7 (2004)
3. Install the seat belt escutcheon to the rear roof garnish molding.
4. Install the push-in retainers to the rear roof garnish molding, applying pressure on the molding to secure at all retainer locations.
Garnish Molding Replacement - Windshield Pillar
GARNISH MOLDING REPLACEMENT - WINDSHIELD PILLAR
REMOVAL PROCEDURE
1. Remove the windshield garnish molding from the windshield pillar by pulling the windshield garnish molding to release the push-in retainers.
2. Remove the windshield garnish molding from the windshield pillar.
INSTALLATION PROCEDURE
1. Align the windshield garnish molding to the trough on the upper instrument panel trim panel.