Rendezvous AWD V6-3.6L VIN 7 (2004)
6. Adjust the front seat assembly up and forward in order to access the fasteners (1).
NOTE: Refer to Fastener Notice in Service Precautions.
7. Install the fasteners (1) to the seat cushion assembly.
Tighten
Tighten the fasteners to 9 N.m (80 lb in).
8. Angle the front seat cushion up, in order to access the assembly fasteners.
Tighten
Tighten the fasteners to 9 N.m (80 lb in).
9. Enable the SIR. Refer to SIR Disabling and Enabling Zone 7 in Restraint Systems.
10. Calibrate the seat. Refer to Memory Seat Calibration Procedure.