Rendezvous AWD V6-3.6L VIN 7 (2004)
2. Connect the mirror motor electrical connectors.
3. Position the mirror motor into the mirror housing.
Notice: Refer to Fastener Notice in Cautions and Notices.
4. Install the mirror motor screws.
Tighten the screws to 10 N.m (89 lb in).
5. Install the mirror face. Refer to Mirror Face Replacement (See: Service and Repair/Mirror Face Replacement) .
6. Install the front door trim panel. Refer to Trim Panel Replacement - Side Front Door (Aztek) (See: Doors, Hood and Trunk/Doors/Front
Door/Front Door Panel/Service and Repair/Panel Replacement/Trim Panel Replacement - Side Front Door (Aztek))Trim Panel Replacement -
Side Front Door (Rendezvous) (See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Panel Replacement/Trim
Panel Replacement - Side Front Door (Rendezvous)) .
7. Inspect the mirror for proper operation.
