Rendezvous AWD V6-3.6L VIN 7 (2004)
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the rear screw to the seat cushion trim cover.
Tighten the rear seat cushion trim cover screw to 40 N.m (30 lb ft).
4. Install the front screw from the rear seat cushion trim cover.
Tighten the rear seat cushion trim cover screw to 40 N.m (30 lb ft).
5. Install the rear seat belt buckle. Refer to Seat Belt Buckle Replacement - Rear (Bucket) Seat Belt Buckle Replacement - Rear (Split Bench) .
6. Install the rear bucket seat to the vehicle. Refer to Seat Replacement - Rear Bucket (See: Service and Repair/Seat Replacement - Rear Bucket) .
