Rendezvous AWD V6-3.6L VIN 7 (2004)
Seat Heater: Service and Repair
Seat Back Heater Element Replacement - Front
Seat Back Heater Element Replacement - Front
Removal Procedure
1. Remove the front bucket seat. Refer to Seat Replacement - Bucket (See: Service and Repair/Seat Replacement - Bucket) .
2. Remove the back from the front seat. Refer to Seat Back Replacement - Front (See: Seat Back/Service and Repair/Removal and Replacement/Seat
Back Replacement - Front) .
3. Remove the headrest. Refer to Head Restraint Replacement - Front Seat (See: Head Rest/Service and Repair/Removal and Replacement/Head
Restraint Replacement - Front Seat) .
4. Remove the armrest. Refer to Armrest Replacement - Front Seat (See: Interior Moulding / Trim/Arm Rest/Service and Repair) .
5. Separate the J-hook retainer at the bottom of the seat back cover.
6. Position the cover end flaps for access.
7. Remove the side air bag from the front seat. Refer to one of the following procedures:
*
Inflatable Restraint Side Impact Module Replacement - RH
*
Inflatable Restraint Side Impact Module Replacement - LH
8. Separate the seat back cover from the front retainer at the side impact airbag.
9. Separate the seat back cover from the rear retainer at the side impact airbag.
10. Separate the hook and the loop retainers securing the seat back cover to the pad.