Rendezvous AWD V6-3.6L VIN 7 (2004)
11. Remove the seat back cover by pulling the cover up and over the pad.
12. Remove the hog rings which secures the cover to the pad.
13. Remove the cover from the pad.
14. If the cushion is damaged, replace the cushion.
15. Remove the seat back heater element.
Installation Procedure
1. Install the seat back heater element.
2. Install the front seat back cover. Align the marks on the cover and the pad.
3. Install the hog rings from the cover to the pad.
4. Install the cover over the pad while aligning the hook and the loop retainers.
5. Install the hook and the loop retainers, securing the cover to the pad.
6. Install the cover to the front retainer at the side impact airbag.