Rendezvous AWD V6-3.6L VIN 7 (2004)
2. Position the torque rod bracket to the rear body panel.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the bolts to the torque rod bracket.
Tighten the torque rod bracket bolts to 25 N.m (18 lb ft).
4. Position the torque rod to the torque rod bracket .
5. Install the endgate torque rod bolt to the torque rod bracket.
Tighten the endgate torque rod bolt to 10 N.m (89 lb in).