Rendezvous AWD V6-3.6L VIN 7 (2004)
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the screws to the cooling fan motor.
Tighten the screws to 6 Nm (53 inch lbs.).
3. Connect the cooling fan motor electrical connectors.
4. Install the cooling fans to the shroud.
5. Important: Turn the cooling fan nuts counterclockwise to tighten.
Install the cooling fan nuts.
Tighten the nuts to 6 Nm (53 inch lbs.).
6. Install the cooling fan assembly including the shroud.
