Rendezvous AWD V6-3.6L VIN 7 (2004)
Heater Hose: Service and Repair
Heater Hose Replacement - Outlet
HEATER HOSE REPLACEMENT - OUTLET
TOOLS REQUIRED
J 38185 Hose Clamp Pliers
REMOVAL PROCEDURE
1. Drain the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
2. Remove the wiper motor module assembly.
3. Disconnect the vacuum hose from the brake booster and reposition the hose.
4. Disconnect the outlet heater hose from the outlet heater pipe.
5. Use J 38185 to disconnect the outlet heater hose clamp.
6. Disconnect the hose from the heater core.
7. Remove the hose.
INSTALLATION PROCEDURE
1. Install the outlet heater hose.
2. Connect the hose to the heater core.
3. Use J 38185 to connect the heater hose clamp.
4. Connect the outlet heater hose to the outlet heater pipe.
5. Connect the vacuum hose to the brake booster.
6. Install the wiper motor module assembly.
7. Fill the cooling system. Refer to Draining and Filling Cooling System in Cooling System.