Rendezvous AWD V6-3.6L VIN 7 (2004)
Radiator Cooling Fan Motor: Service and Repair
Cooling Fan Motor Replacement - Electric
Removal Procedure
1. Caution: Refer to Electric Coolant Fan Caution in Service Precautions.
Caution: Refer to Damaged Fan Blade Caution in Service Precautions.
Important: If abnormal noise or vibration is felt from the engine compartment, inspect and clean any foreign material from the cooling fan
blades.
Turn the ignition off.
2. Remove the cooling fan and shroud assembly.
3. Important: Turn the cooling fan nut clockwise to loosen.
Remove the cooling fan nut.
4. Remove the cooling fan from the shroud.
5. Disconnect the electrical connector from the cooling fan motor.
6. Remove the screws from the cooling fan motor.
7. Remove the cooling fan motor.
Installation Procedure