Rendezvous AWD V6-3.6L VIN 7 (2004)
Variable Valve Timing Actuator: Service and Repair
Camshaft Position (CMP) Actuator Replacement - Bank 1 (Right) Intake
CAMSHAFT POSITION ACTUATOR REPLACEMENT - BANK 1 (RIGHT SIDE) INTAKE
Removal Procedure
Important: To identify the camshaft drive design, refer to Camshaft Timing Drive Design Identification. See: Timing Components/Application and ID
1. Remove the right exhaust camshaft actuator. See: Camshaft Position (CMP) Actuator Replacement - Bank 1 (Right) Exhaust
2. Remove the intake camshaft position actuator bolt.
3. Remove the right intake camshaft position actuator.
Installation Procedure
