Rendezvous AWD V6-3.6L VIN 7 (2004)
Valve Cover: Service and Repair
Valve Rocker Arm Cover Replacement (Right)
Camshaft Cover Replacement - Right
Removal Procedure
1. Remove the engine cover.
2. Remove the upper intake manifold with the lower intake manifold.
3. Disconnect the ignition coil electrical connectors.
4. Remove the wiring harness from the side of the camshaft cover by sliding the conduit down and outboard.
5. Remove the wiring conduit retainers from the camshaft cover by rotating the wiring harness conduit retainers counterclockwise.