Rendezvous AWD V6-3.6L VIN 7 (2004)
Important: This design, called "Second Design" was used:
‹› 2005: All Applications except Buick Rendezvous
‹› 2006: All Applications
‹› The second design crankshaft sprocket (5) incorporates an inverted tooth (IT) timing drive chain without a molded-rubber cushion ring.
‹› The second design primary timing drive uses an inverted tooth timing drive chain (1).
‹› The second design intermediate drive shaft sprockets incorporate IT timing drive chain sprocket teeth (4) for the primary timing drive chain (1) and
roller timing drive chain sprocket teeth (3) for the secondary timing drive chains (2).
‹› The second design IT timing drive system can be used in place of the first design roller timing drive system but all of the following primary timing
drive components must be changed to the IT design:
- Primary timing drive chain
