Rendezvous AWD V6-3.6L VIN 7 (2004)
INSTALLATION PROCEDURE
1. Install the left hand air temperature actuator.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the left hand air temperature actuator mounting screws.
Tighten
Tighten the screws to 1.6 N.m (14 lb in).
3. Connect the left hand air temperature actuator electrical connector.
IMPORTANT: Align the pin on the left hand air temperature actuator with the slot in the left hand temperature door lever.
4. Install the left hand temperature door lever (1) to the left hand temperature door.
5. Connect the left hand temperature door lever spring (2) to the left hand temperature door lever (1) and HVAC module case.
6. Install the left hand temperature door lever bolt (3) to the HVAC module case.
