Rendezvous AWD V6-3.6L VIN 7 (2004)
Air Register: Service and Repair
Air Outlet Replacement - Floor
AIR OUTLET REPLACEMENT - FLOOR
REMOVAL PROCEDURE
1. Remove the right instrument panel (I/P) insulator.
2. Remove the left I/P insulator.
3. Remove the I/P compartment.
4. Remove the center floor air outlet.
5. Remove the screws retaining the heater outlet duct.
6. Remove the heater outlet duct.
INSTALLATION PROCEDURE
1. Install the heater outlet duct.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the heater outlet duct screws.
Tighten
Tighten the screws to 0.9 N.m (8 lb in).
3. Install the center floor air outlet.
4. Install the I/P compartment.
5. Install the left I/P insulator.
6. Install the right I/P insulator.
