Rendezvous AWD V6-3.6L VIN 7 (2004)
13. Remove the evaporator inlet tube bolt from the condenser block.
14. Disconnect the evaporator inlet tube from the condenser block.
15. Cap or tape off the evaporator inlet tube.
16. Remove the radiator and condenser assembly.
17. Remove the condenser tube clip bolt.
18. Remove the condenser tube clip.
19. Remove the condenser mounting bolts.
20. Remove the condenser from the radiator.
21. Remove the receiver dehydrator upper bracket bolt.
22. Remove the receiver dehydrator lower mounting bolts.
23. Disconnect the receiver dehydrator from the condenser.
24. Remove and discard the sealing washers.
