Rendezvous AWD V6-3.6L VIN 7 (2004)
8. Remove the blower control processor assembly from the HVAC module assembly.
INSTALLATION PROCEDURE
1. Install the blower motor control processor assembly to the HVAC module assembly.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the rearward mounting screw.
Tighten
Tighten the screw to 1.8 N.m (16 lb in).
3. Install the forward mounting screws.
Tighten
Tighten the screws to 1.8 N.m (16 lb in).