Rendezvous AWD V6-3.6L VIN 7 (2004)
1. Install the heater core cover.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the heater core cover retaining screws.
Tighten
Tighten the screws to 0.9 N.m (8 lb in).
3. Connect the I/P harness to heater core cover tie strap.
4. Install the heater outlet duct.
5. Install the heater outlet duct screws.
Tighten
Tighten the screws to 0.9 N.m (8 lb in).
6. Install the center floor air outlet.
7. Install the I/P compartment.
8. Install the left I/P insulator.
9. Install the right I/P insulator.