Rendezvous AWD V6-3.6L VIN 7 (2004)
Hose/Line HVAC: Service and Repair
Evaporator Tube Replacement - Inlet
EVAPORATOR TUBE REPLACEMENT - INLET
TOOLS REQUIRED
J 39400-A Halogen Leak Detector
REMOVAL PROCEDURE
1. Remove the air cleaner assembly.
2. Recover the refrigerant from the A/C system. Refer to Refrigerant Recovery and Recharging.
3. Remove the wiper motor module.
4. Remove the clamp nut from the evaporator inlet tube.
5. Disconnect the electrical connector from the A/C pressure sensor.
6. Remove the A/C pressure sensor from the evaporator inlet tube.
7. Remove the nut that secures the evaporator outlet tube to the TXV.
8. Disconnect the evaporator outlet tube from the TXV.
9. Disconnect the evaporator inlet tube from the evaporator outlet tube.
IMPORTANT: Cap or tape the A/C refrigerant components immediately to prevent system contamination.
10. Cap or tape off the TXV.
