Rendezvous AWD V6-3.6L VIN 7 (2004)
2. Connect the vehicle harness yellow connector (2) to the LF side impact module yellow connector (1).
3. Install both CPAs (3) to the LF side impact module yellow connector (1).
4. Install the SIR Fuse.
5. Install the console accessory wiring junction block access hole cover.
6. Staying well away from all inflator modules and pretensioners, turn ON the ignition.
6.1.
The AIR BAG indicator will flash 7 times.
6.2.
The AIR BAG Indicator will then turn OFF.
7. Perform Diagnostic System Check - Restraint Systems if the AIR BAG indicator does not operate as described.