Rendezvous AWD V6-3.6L VIN 7 (2004)
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the power steering reservoir mounting stud bolt.
Tighten the power steering reservoir mounting stud bolt to 25 Nm (19 ft. lbs.).
4. Install the power steering pressure pipe/hose to the power steering reservoir bracket.
5. Connect the ECM wire harness to the ECM wire harness clip on the reservoir.
6. Use the floor jack to raise the right side of the frame and powertrain.
7. Install the right side frame-to-body bolts
8. Remove the floor jack from the frame and powertrain.
9. Raise and support the vehicle. Refer to Vehicle Lifting.
