Rendezvous AWD V6-3.6L VIN 7 (2004)
Fuel Line Coupler: Service and Repair
Quick Connect Fitting(S) Service (Plastic Collar)
QUICK CONNECT FITTING(S) SERVICE (PLASTIC COLLAR)
REMOVAL PROCEDURE
CAUTION: Refer to Gasoline/Gasoline Vapors Caution in Service Precautions.
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure.
CAUTION: Wear safety glasses when using compressed air, as flying dirt particles may cause eye injury.
2. Blow dirt out of the fitting using compressed air.
3. Squeeze the plastic tabs of the male end connector.
4. Pull the connection apart.
5. Using a clean shop towel, wipe off the male pipe end
6. Inspect both ends of the fitting for dirt and burrs.
7. Clean or replace the components as required.
INSTALLATION PROCEDURE
CAUTION: In order to reduce the risk of fire and personal injury, before connecting fuel pipe fittings, always apply a few drops of clean
engine oil to the male pipe ends.