Rendezvous AWD V6-3.6L VIN 7 (2004)
Fuel Supply Line: Service and Repair
Hose, Fuel Feed-Replacement
HOSE, FUEL FEED - REPLACEMENT
REMOVAL PROCEDURE
1. Turn the ignition OFF.
2. Remove the air inlet duct.
3. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure.
4. Remove the fuel pressure and evaporative emission (EVAP) hoses from the engine.
5. Remove the purge line from the purge line retainer.
6. Remove the throttle body.
7. Remove the fuel feed hose bracket bolt.
