Rendezvous AWD V6-3.6L VIN 7 (2004)
connector has all white wires.
Use splice seal connectors when replacing the throttle body harness connector.
Refer to and copy out all of the appropriate repair procedures from SI (Service Information) before attempting this repair.
Refer to Idle Learn in SI to perform the Idle Learn Procedure.
If the condition is still present after the throttle body connector and the throttle body have been updated, refer to Testing for Intermittent and Poor
Connections in SI for testing for intermittent and poor connections at the ECM, APP Sensor, and Throttle Body.
Parts Information
Warranty Information
For vehicles repaired under warranty, use the table.
Disclaimer
