buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

ABOUT US
Camshaft Position (CMP) Sensor Replacement - Bank 1 (Right) Exhaust|Page 5030 > < Camshaft Position (CMP) Sensor Replacement - Bank 1 (Right) Exhaust|Page 5028

Rendezvous AWD V6-3.6L VIN 7 (2004)

Page 2
background image

1. Install the CMP sensor.

NOTE:  Refer to Fastener Notice in Service Precautions.

2. Install the CMP sensor bolt.

Tighten the CMP sensor bolt to 10 N.m (89 lb in).

3. Install the CMP sensor electrical connector (2).
4. Install the power steering pressure hose bracket and nut as necessary.

Camshaft Position (CMP) Sensor Replacement - Bank 1 (Right) Exhaust|Page 5030 > < Camshaft Position (CMP) Sensor Replacement - Bank 1 (Right) Exhaust|Page 5028