Rendezvous AWD V6-3.6L VIN 7 (2004)
3.
Using the J 43244 (1), Relay Puller Pliers, position the tool on the opposing corners of the relay (2).
Notice:
Use J 43244 to pull the relay straight out from the electrical center terminals. The use of pliers or a flat-bladed tool could damage the electrical
center.
4.
Remove the relay (2) in the same position as the removed relay.
Installation Procedure
1.
Install the new relay (2) in the same position as the removed relay.
2.
Install the electrical center cover.