Rendezvous AWD V6-3.6L VIN 7 (2004)
Camshaft Position Sensor: Service and Repair
Camshaft Position (CMP) Sensor Replacement - Bank 1 (Right) Intake
CAMSHAFT POSITION (CMP) SENSOR REPLACEMENT - BANK 1 (RIGHT) INTAKE
REMOVAL PROCEDURE
1. Turn the ignition OFF.
2. Remove the power steering pressure hose bracket nut and reposition the hose as necessary in order to gain access.
3. Remove the camshaft position (CMP) sensor electrical connector (2).
4. Remove the CMP sensor bolt.
5. Remove the CMP sensor.
INSTALLATION PROCEDURE
