Rendezvous AWD V6-3.6L VIN 7 (2004)
8. Remove the crank sensor heat shield bolts and the heat shield.
IMPORTANT: Use a universal or swivel socket with a long extension in order to remove the bolt.
9. Remove the crankshaft position (CKP) sensor bolt.
IMPORTANT: It may be necessary to use a long flat-bladed tool in order to carefully remove the CKP sensor.
10. Use a long flat-bladed tool in order to carefully remove the CKP sensor and harness.
11. Disconnect the wiring harness from the CKP sensor.
INSTALLATION PROCEDURE
1. Connect the wiring harness from the CKP sensor.