Rendezvous AWD V6-3.6L VIN 7 (2004)
2. Use a long flexible pick-up tool in order to position the CKP sensor to the engine block.
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Use a universal or swivel socket with a long extension in order to install the bolt.
3. Install the CKP sensor bolt.
Tighten the CKP sensor bolt to 10 N.m (89 lb in).
IMPORTANT: Use a universal or swivel socket with a long extension in order to install the bolts.
4. Install the crank sensor heat shield and the heat shield bolts.
Tighten
-
Tighten the upper crank sensor heat shield bolt (1) to 10 N.m (89 lb in).
-
Tighten the lower crank sensor heat shield bolt (2) to 50 N.m (37 lb in).