Rendezvous AWD V6-3.6L VIN 7 (2004)
1. Install the passenger side air bag (2) to the seat while guiding the air bag wiring harness (3) through the trim cup.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the air bag fasteners (1).
Tighten
Tighten the fasteners (1) to 10 N.m (89 lb in).
3. Gently pull the air bag wiring harness (3) down into the seat cushion while guiding the harness through the wire triangle of the seat frame.
4. Install the harness retaining clips to the seat frame.
5. Install the seat back cover.
6. Connect together the J-clip that is along the lower rear seat back.
7. Install the passenger seat.
8. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 9.